Azur Alloy Touring Carrier - Black

• Suits MTB and 700C
• Material : Alloy
• 25kg capacity

Installation instructions
Tools needed: 8mm spanner or adjustable wrench, Philips head screwdriver and 4mm allen key.

1. Attach the legs to the mounting points on the rear dropout using 4mm Allen screws. (Partially tighten)

2. Slide the attachment arms towards the mounting points on the seat stays of your bike. Ifthey don’treach the frame mounting points, remove the four (4) bolts that hold the attachment arms to the carrier and reattach the four (4) bolts in the next set of slots in the attachment arms. (Partially tighten)

3. Slide the attachment arms towards the mounting points on the seat stays of your bike, satisfying yourselfthey will reach the mounting points and allow the top plate ofthe carrierto remain horizontal when permanently fixed to the bike.

4. Position the carrier so thatthe top plate is horizontal and ascertain whetherthe attachment arms need to be bent, (by hand or with an adjustable wrench),to line up with the frame mounting points and attach with 4mm Allen screws. (Partially tighten).

5. Pivotthe carrier back and forth till you are satisfied with the position then securely tighten allthe screws/bolts to have the carrier remain in the desired position.

NOTE: We suggestthat you use “Loctite” or any another proprietary product which is used to secure threaded bolts and screws,this will help to eliminate loosening due to vibration.